 |
 |
|
|
Silicone |
|
|
|
Silicone is a synthetic polymer and is produced by a crosslinked polymer
reinforced with silica. Further cross-linking takes place by heating with a particular
catalyst (i.e. peroxide), to produce the required properties.
Silicone has good environmental resistance to heat, cold, ozone, UV, humidity and
abrasion.
It has outstanding heat resistance, to over 230°C. Electrical resistance is also
excellent, and Silicone is frequently used in high voltage/high current applications.
However, Silicone can be modified with additives to make it electrically conductive.
|
Silicone does not support microbiological growth, which makes it very useful in
pharmaceutical and medical environments.
Silicone is a high performance polymer and necessarily more expensive because of
its properties. It is made in lower quantities and requires expensive equipment for
the compound and the final product’s manufacture.
Silicone is highly permeable to gas, which can be a useful property.
Silicone is not classed as hazardous waste, and therefore can be disposed of according
to local regulations.
|
|
|
|
|
|
Silicone - High Strength
general product information
Product
Medical Grade Silicone, Peroxide Cured
Full Name
Silicone
Application
Medical, Pharmaceutical & Industrial Users, High Strength for use on Peristaltic Pumps
Characteristics
Good Chemical Resistance
Wide Operating Temperature Range
Excellent Pumping Characteristics
Flexible, Kink Resistant, Odourless
Non-Toxic, Low Compression Set
Temperature Range
-50°C to +230°C (-58°F to +446°F)
Sterilizations
Ethylene Oxide
Gamma Irradiation
Autoclave (Unbridged Tubing)
Hardness
60 Shore A
Elongation at Break
450% - 540%
Tear Strength
34Kn/m
Certification
Meets USP Class VI
US Pharmacopoeia Approved and Certified
|
|
|
|
 |
|
|
